I have a CISCO 2509 attached to our offic LAN with US Robotics modem connected to the ASYNC via an octal cable. How would I configure my router so that when I dial-in from home I could login to me WinNT PDC and gain access to my network? Is there anything I would configure on my NT server as well?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Help on remote access
- Thread starter madho07
- Start date
MelchiorKD
IS-IT--Management
you need to set up remote access on the server. Bein able to dial into the router isn't going to help access to the server.
Mel is right. You can use NT for the sever to set-up the RAS protocol since it built into WinNT. Now you can log into your LAN using a modem or other connections. Also, depending on your connection you have a few choiches of protocols to implement your remote access. So, of course you do something with the NT server.
good day
good day
- Status