HELP! Networking MICS and CICS system using an ATA2 and a trunk port

[tincanphoneman]

I've aquired a new customer, they have a CICS in one building and a MICS in the other building and have a direct feed tying the buildings together.
They have an ATA2 on the MICS going to a trunk port on the CICS.
It worked for a while, but now it is dropping 2 or 3 times a day.
My question is: Is there any programming I can tweak to get this to stay up? I've replaced the ATA2 and the port on the DS card.
Also can anyone suggest a more efficient way of tying a CICS to a MICS?

 

[curlycord]

Thats is the cheapest easiest way.

Sounds like bad pairs, bad trunk card or bad amp cables.

Did you reboot everything?



=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[tincanphoneman]

I did reboot the system, but haven't changed the port off of the ata2.