Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HELP! Networking MICS and CICS system using an ATA2 and a trunk port

Status
Not open for further replies.

tincanphoneman

Technical User
Sep 13, 2005
8
US
I've aquired a new customer, they have a CICS in one building and a MICS in the other building and have a direct feed tying the buildings together.
They have an ATA2 on the MICS going to a trunk port on the CICS.
It worked for a while, but now it is dropping 2 or 3 times a day.
My question is: Is there any programming I can tweak to get this to stay up? I've replaced the ATA2 and the port on the DS card.
Also can anyone suggest a more efficient way of tying a CICS to a MICS?
 
I did reboot the system, but haven't changed the port off of the ata2.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top