HELP!! Need beginners guide to changing CFXD to CFXA

[robertwo]

I have recently taken over a Meridain system, and have not used one on the last 8 years so can not for the life of me remember how to programme them.

What I need is a step by step guide of how to change the Forwarding options of a DN to allow it to forward externally.

If I remember correctly I have to change CFXD to CFXA and the forward button from 4 to 16!!!

Anybody that knows how to do this and is can send me some instructions would be a life saver.

Thanks.

Rob.

 

[stratplayer10]

Hi, you seem to have ot about right, set the CLS option to CFXA, and ensure that you have enough digits to divert the call, 16 should do anyway, if this is an analogue set, remember you have to add the feature, FTR CFW 16, if its digital you go it on the key of course,, Ray

 

[robertwo]

I could really do with a list of commands to change these options.... Is it LD 10, 20, 11.... I can;t remember anymore and BT are not being very helpful.

Thanks

 

[RCorrigan]

Robertwo :

Have you tried

http://www.productsupport.bt.com

?
You do have to register, but it's fairly painless
You can find all the manuals for Meridian etc in web or pdf format.

Rgards Richard

<Do I need A Signature or will an X do?>

 

[robertwo]

Ok figured it out usign3 very large manulas and this site.

Here's what I came up with:

Log in to system
Type LD 10
REQ: CHG
Type: 2612 (Or the type of other digital phone, most are 2616)
TN: [TN number – can be found in excel doc on K:\Systems ManualECHG: <CR>
DES: <CR>
AOM: <CR>
FDN: <CR>
TGAR: <CR>
LDN: <CR>
NCOS: <CR>
RNPG: <CR>
SSU: <CR>
SCPW: <CR>
SGAP: <CR>
SGAP: <CR>
CLS: CFXA <CR>
<CR> until you get to KEY
KEY: 04 ICF 16 (04 is the key number, 16 is the max length of the number entered)
KEY: <CR>

FInsihed

 

[johnpoole]

try echg=yes
then
cls cfxa
key 4 adl 16
return to a few times

john poole
bellsouth business
columbia,sc