I want enable SFFD on optical port of 8616SX-E board, but I can’t do it.
# config ethernet 3/5 auto-negotiate disable
# config ethernet 3/5 sffd enable
Error: port 3/5, this hardware does not support SFFD enabling/disabling
In Network Design Guidelines I read that it is feature is supported on this board. Can anyone help me?
# config ethernet 3/5 auto-negotiate disable
# config ethernet 3/5 sffd enable
Error: port 3/5, this hardware does not support SFFD enabling/disabling
In Network Design Guidelines I read that it is feature is supported on this board. Can anyone help me?
Code:
Sys Info:
---------------
General Info :
SysDescr : Passport-8610 (3.5.10.0)
SysName : Passport 1
SysUpTime : 74 day(s), 21:40:49
SysContact : support@nortelnetworks.com
SysLocation : 4655 Great America Parkway, Santa Clara, CA 95054
Chassis Info :
Chassis : 8010
Serial# : SSPN6C023S
HwRev : 05
NumSlots : 10
NumPorts : 88
GlobalFilter: enable
VlanBySrcMac: disable
Ecn-Compatib: enableMacAddrCapacity : 1024
Temperature : 30 C
MgmtMacAddr : 00:13:0a:de:33:f4
System MTU : 1950
clock_sync_time : 60
Power Supply Info :
Ps#1 Status : empty
Ps#2 Status : up
Ps#2 Type : ac
Ps#2 Description : 8004 850W 110/220V AC Power Supply
Ps#2 Serial Number: ARTSDG025475
Ps#2 Version : 08
Ps#2 Part Number : 312071-C
Ps#3 Status : up
Ps#3 Type : ac
Ps#3 Description : 8004 850W 110/220V AC Power Supply
Ps#3 Serial Number: ARTSDG022417
Ps#3 Version : 08Fan#1: up, air temp: 29 C
Fan#2: up, air temp: 27 C
Card Info :
Slot# FrontType FrontHw Oper Admin BackType BackHw
Version Status Status Version
1 48x100BaseTX-E 07 up up BFM6 07
2 16x1000BaseT-E 05 up up BFM8 05
3 16x1000BaseSXBB-E 11 up up BFM8 11
4 8x1000BaseT-E 06 up up BFM8 07
5 CPU 06 up up SFM 05
System Error Info :
Send Authentication Trap : false
Error Code : 0
Error Severity : 0
Port Lock Info : Sys Software:
---------------