This particular hdd recently stopped working, all my others work fine.
Its a Seagate barracuda 7200.11 1TB ST31000340AS SATA.
The drive spins up fine and sounds normal, but its not detected by the computer. When I turn on the PC, the POST takes a lot longer than normal when this hdd is connected (regardless of whether other hard drives are connected or not). It's not shown in the BIOS, setup, or windows. Briefly tried it on another PC, same thing.
Any ideas what the problem is? Could it be fixed by replacing the board from the same model hdd?
Thats a lot for any help!
Its a Seagate barracuda 7200.11 1TB ST31000340AS SATA.
The drive spins up fine and sounds normal, but its not detected by the computer. When I turn on the PC, the POST takes a lot longer than normal when this hdd is connected (regardless of whether other hard drives are connected or not). It's not shown in the BIOS, setup, or windows. Briefly tried it on another PC, same thing.
Any ideas what the problem is? Could it be fixed by replacing the board from the same model hdd?
Thats a lot for any help!