help me about VSU 1

[mrtruong]

I have a MD110 system with BC10 using NIU card interface. I want perform the Announcements for external subscribers calling to my exchange. I have VSU1 card, What do i have to do?
thank a lot!!!!!!!!!!!!!!!!!!!!111

 

[Satellite1900]

CNHUI:BPOS=X-XX-XX; for the VSU1

RAEQI:BPOS=X-XX-XX,VSID=1,COMPR=NO; initiating an equipment position

RADNIIR=XXXX,VSID=1,CAT=X;assigning a directory number to a VSID to support message programming from an extension

Call from another extension the number of RANDI and records the messages

RADSI:VSID=1,ANN=1; assigning announcement numbers to a voice server board identity number, this example for only one announcement
RADSI:VSID=1,ANN=2; and so on for all announcement

RAMDI:ANN=1,MSG=1; assign the announcement to messages
RAMDI:ANN=2,MSG=2; and so on

explains in detail what you need to do for the rest of the programming.
commands vary according to your needs and we also check the ASPAP

BYE

 

[Satellite1900]

forgot
When the programming session is established, the text message, "VSU READY", is displayed if the DTS has a LCD display.
To start recording, enter the procedure, 2*the message number#.
The recording stops when the # key is pressed and the message is stored.
it is possible to play the message by pressing the procedure, 1*the message number#.
it is possible to erase the message by pressing the procedure, 3*the message number#.

 

[whosrdaddy]

Dont forget the ASPAC's (116,138,147,161,169,...)

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Satellite1900]

sure daddy , I had written, but I expected him to describe what he had to do specifically

 

[mrtruong]

Thank all! I'll do it!