Help lost a screen on Netware 5.0

[JohnCruz]

Hello, hope you guys could help. I'm running Netware 5.0 and have lost the Console Monitor screen where I could see all the files and who is connected to these files on my server. I know this is an easy problem with a quick fix but can not remember how to reactive the screen. Thank you guys for your help.

John

 

[Psychoid]

Hi.
If you cycle through your screens using ALT-ESC, is one of them the Monitor screen?

If not, you can start it from the console prompt by just typing monitor or load monitor


------------
Bill
Consultant / Network Engineer
CNE, CCNA

 

[JohnCruz]

Thanks Bill, I am able to toggle thru the screens, the load monitor was what I was looking for. Thanks again for your help.
john

 

[mham101]

HOw do I configure smdr.nlm to run with backup exec 9.0 on a netware 5.0 server? when I try to run it, I get cannot setup configuration ffffda7. could not obtain cinfiguration information/create configuration fine.

Mark

 

[Lou0686]

Hi,

Unload SMDR, TSA and anything else it prompts you to.

Type load smdr new

Respond no to all disabling prompts

Follow istructions for other steps and it should losd fine. Do thsi on all the servers.

Lou