I have two W2000 machines connected via fibre (SC/SC multimode) with each machine using SL PCI Card 100BFX. I have specified the same IP address and subnet mask on each machine and they both belong to the same workgroup. But the machines cannot see one another. I have installed all the correct driver and all hardware is running correctly. If anyone could help me resolve this I would appreciated it.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Help, Linking 2 W2000 PC's via fibre
- Thread starter pamkb69
- Start date
jeffbouldin
Technical User
The first thing is to make sure you have the transmit on one going to the receive on the other. Try flipping the fibers at one of the machines.
- Thread starter
- #3
- Status
Similar threads