Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HELP IP 500 V1 FREZZES AFTER PROGRAM CHANGE.

Status
Not open for further replies.

fyrman

Vendor
Aug 26, 2010
26
Hello all. I have an ip office 500 v1 running 4.0.20 sftwr.I made a few changed to programming the other day and the system never came up after the reboot. i went onsite to see what was happening and i see that the back lights CPU & CF were both flashing red. the system would not respond to any type of reboot, nor can you see it through manager. i plugged into the DTE port did the AT, AT-X2, AT-X3, Rebooted and manager could not see the unit. i then made sure the bootp entry was present and used hyperterm again thru the dte and did the AT-X.
now manager does display=
Received TFTP request for E:\Program Files (x86)\Avaya\IP Officeback\Manager\ip500.bin from 192.168.42.1:151

hyperterm displays
CPU Board Version is: 0xD0
CPU PLD Version is: 0x17
CPUID: 0x02 Present: 0x00 Present2: 0x02
Using FPGA build 0x0000005E
Programming FPGA ...
FPGA ID 0x01 Version 0x00 Build 0x0000005E
Initialising NAND device.. registering..
Added device: Samsung 64MB NAND (small block) - 0x0000


P13 Loader v1.3 (SDRAM 128 MB)
MPC8248 CPU Revision 0x0C10
Broadcom Switch Mode was 0x05 now 0x06
EthChipRevId: 0x01 EthPhyId: 0x0143BC30
Erase Main Image Storage Area

OK
------------
After unit reboots ip500v1 displays


Received BOOTP Response (IFace 00): C0.A8.2A.01 ip500.bin

the TFTP LOG
Friday, February 14, 2014 3:26:20 PM : Log started
Friday, February 14, 2014 3:26:20 PM : Received TFTP request for E:\Program Files (x86)\Avaya\IP Officeback\Manager\ip500.bin from 192.168.42.1:151
Friday, February 14, 2014 3:33:15 PM : Received BOOTP request for 00e007053a3f, 192.168.42.1:68
Friday, February 14, 2014 3:33:15 PM : Sending BOOTP response to 00e007053a3f, 192.168.42.1:68
Friday, February 14, 2014 3:33:16 PM : Received TFTP request for E:\Program Files (x86)\Avaya\IP Officeback\Manager\ip500.bin from 192.168.42.1:151

THEN NO UPLOAD NOR DOWNLOAD.
RED light on rear is now cpu=green steady.


loaded orig mgr and admin sftwr 4.2
bootp setting was to the correct ip address and bin file set to ip500.bin.

any thoughts????????
ron k[evil]
 
Intrigrant, is't that what i did?

RON K.
 
Maybe, you could have missed a step.
Did you give your PC a fixed IP Address : 192.168.42.5/255.255.255.0?
Is TFTP enabled in Manager?
Are the Manager file settings directing to the right folder? C:\Program Files (x86)\Avaya\IP Office\<Manager path>


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top