help in configuration of DIUN2 PRI for hipath 4000 V2.0

[vijaydlj]

IN our HIPATH 4000 v2.o recently we have installed PRI DIUN2 card for DID purpose. But presently it does not give ring to our local internel telephones connected to Hipath . But when we configure DGTPR for any internal telephone no. for force dialling then all calls landed on that no., otherwise when any one from outside dials our did no 2567xxx a busy tone is being heard by calling party , please suggest the step by step configuration wise solutations.

 

[AbdulRashid]

Dear Vijaydlj,
first of all you shoul ask "cetral office" (PRI LINE PROVIDER)that how many digits thay are sending from their side AND how many DID they are giving you? for example 2567000 to
2567099.It mean they are giving you 100 DID lines.
2nd what is your extension number scheme is it 200 to 299, or 300 to 399,
or 2000 to 2999.
3rd. SUPPOSE if they are sending you 2567 only then, caller will call 2567200. 200 is your extension.
4th you have to define in cha-tdcsu:suppers=4;
mean who ever call first four digits 2567 will be suppresed by pabx rest of number (200)
will be extension, then call will directly land to that extenson.THESE WRE THE EXAMPLE.

LET ME KNOW HOW MANY DIGITS CENTRAL OFFICE ARE SENDING YOU.
WHAT IS SCHEME OF YOUR EXTENSION.
I WILL GIVE YOU TOTAL CONFIGURATION.
TOMORROW I WILL SEND YOU MY REGEN.FILE WHICH I HAVE CONFIGURED.
AbdulRashid

 

[vijaydlj]

Hello AbdulRashid,

Thanks a lot to express your keen intrest and quick reply.

Our Central office (BSNL) is sending all digits i.e 2567xxx. they have configured the no. scheme from 2567100 to 2567700. this range lies between our inernal telephone no. scheme from 100 to 700.
we are sending you reg-tdsu details as per present configration. in this suppress = 4 implies that hipath suppressing 2567 and passing last three digits which is our internal nos. Now without force dialling to a certain no. we are not able to get call fro outside . How we can change the configuration so invidual can get outside calls. please tell us the fault is in the configuration of hipath or with central office configuration . Central office has OCB Alcatel make exchange.
we will be highly obliged if you can suggest any solution.

KINDLY TELL US IF WE WOULD LIKE TO REQUIRE ANY FURTHER INFORMATION ABOUT OTHER COMMANDS.
--------------------------------------------------------------------------------
Connection opened to: direct 2012-11-02 09:25:00
--------------------------------------------------------------------------------
L01: LOGON ACCEPTED TSN 0042 ALLOCATED 12-11-02 08:24:31
<dis-tdcsu
PEN1 = ;
DIS-TDCSU:;
H500: AMO TDCSU STARTED

DIGITAL TRUNKS (FORMAT=S)
DEVICE PEN BCGR B-CHANNEL TGRP CCT
--------------------------------------------------------
S2COD 1-02-109-1 1 1 && 30 14 PRI2
S2CONN 1-02-109-0 1 1 && 30 13
--------------------------------------------------------
AMOUNT OF B-CHANNELS IN THIS DISPLAY-OUTPUT: 60

AMO-TDCSU-111 DIGITAL TRUNKS
DISPLAY COMPLETED;
<dis-sdsu:all,,pen,per3,1,2,109,1;
DIS-SDSU:ALL,,PEN,PER3,1,2,109,1;
H500: AMO SDSU STARTED

LTG1 (PERIPHERY)
------
MOUNTING LOCATION MODULE NAME BDL BD(#=ACT) STATUS
------------------- LTG 1 --------------------- READY
-L80XF--------SG 1 LTU 2 --------------------- READY
P203.UP 1.L80 2.109 DIU-N2 A Q2196-X READY
CCT LINE STNO SI BUS TYPE
001 1695 PP NW DEPLOCK/NPR
MULTLINE 30 . . . . . . . . . . . . . .NPR/UNACH
000 NO CONN
001 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
002 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
003 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
004 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
005 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
006 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
007 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
008 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
009 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
010 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
011 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
012 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
013 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
014 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
015 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
016 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
017 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
018 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
019 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
020 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
021 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
022 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
023 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
024 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
025 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
026 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
027 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
028 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
029 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
030 NETWORK SUBUNIT . TMD CO ISDN UNACH/DEFIL
(ALT_ROUT: N) (S2COD )
LINE: 1695 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH

AMO-SDSU -111 STATUS DISPLAY IN SWITCHING UNIT
DISPLAY COMPLETED;
<dis-sdsu:all,,pen,per3,1,2,109,0;
DIS-SDSU:ALL,,PEN,PER3,1,2,109,0;
H500: AMO SDSU STARTED

LTG1 (PERIPHERY)
------
MOUNTING LOCATION MODULE NAME BDL BD(#=ACT) STATUS
------------------- LTG 1 --------------------- READY
-L80XF--------SG 1 LTU 2 --------------------- READY
P203.UP 1.L80 2.109 DIU-N2 A Q2196-X READY
CCT LINE STNO SI BUS TYPE
000 1694 PP NW READY
MULTLINE 30 . . . . . . . . . . . . . .READY
000 NO CONN
001 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
002 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
003 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
004 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
005 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
006 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
007 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
008 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
009 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
010 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
011 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
012 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
013 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
014 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
015 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
016 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
017 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
018 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
019 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
020 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
021 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
022 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
023 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
024 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
025 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
026 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
027 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
028 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
029 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY
030 NETWORK SUBUNIT . TMD CONN ISDN READY
(ALT_ROUT: N) (S2CONN )
LINE: 1694 STNO: SI:
001 . . . . . . . . TMD CONN ISDN READY

AMO-SDSU -111 STATUS DISPLAY IN SWITCHING UNIT
DISPLAY COMPLETED;
<dis-tdcsu
PEN1 = 1-2-109-0;
DIS-TDCSU:1-2-109-0;
H500: AMO TDCSU STARTED
+------------------------ DIGITAL TRUNK (FORMAT=L) -------------------------+
| DEV = S2CONN PEN = 1-02-109-0 TGRP = 13 |
|---------------------------------------------------------------------------|
| PROTVAR = ETSI INS = Y SRCHMODE = CIR |
| COTNO = 30 COPNO = 0 DPLN = 2 |
| ITR = 3 COS = 10 LCOSV = 1 |
| LCOSD = 1 CCT = DESTNO = 0 |
| SEGMENT = 8 DEDSCC = DEDSVC = NONE |
| FACILITY = DITIDX = SRTIDX = |
| TRTBL = GDTR SIDANI = N ATNTYP = TIE |
| CBMATTR = NONE NWMUXTIM = 10 TCHARG = N |
| SUPPRESS = 4 DGTPR = 199 CHIMAP = N |
| ISDNIP = ISDNNP = |
| PNPL2P = PNPL1P = PNPAC = |
| TRACOUNT = 31 SATCOUNT = MANY NNO = 1 -1 -130 |
| ALARMNO = 0 FIDX = 1 CARRIER = 1 |
| ZONE = EMPTY COTX = 30 FWDX = 1 |
| DOMTYPE = DOMAINNO = TPROFNO = |
| INIGHT = CCHDL = |
| UUSCCX = 16 UUSCCY = 8 FNIDX = 1 |
| CLASSMRK = EC & G711 & G729OPT SRCGRP = |
| TCCID = |
|---------------------------------------------------------------------------|
| BCNEG = N BCGR = 1 LWPAR = 0 |
| LWPP = 0 LWLT = 0 LWPS = 0 |
| LWR1 = 0 LWR2 = 0 |
| SVCDOM = |
| BCHAN = 1 && 30 |
| |
+---------------------------------------------------------------------------+
AMOUNT OF B-CHANNELS IN THIS DISPLAY-OUTPUT: 30

AMO-TDCSU-111 DIGITAL TRUNKS
DISPLAY COMPLETED;
<dis-tdcsu
PEN1 = 1-2-109-1;
DIS-TDCSU:1-2-109-1;
H500: AMO TDCSU STARTED
+------------------------ DIGITAL TRUNK (FORMAT=L) -------------------------+
| DEV = S2COD PEN = 1-02-109-1 TGRP = 14 |
|---------------------------------------------------------------------------|
| PROTVAR = ETSI INS = N SRCHMODE = CIR |
| COTNO = 1 COPNO = 0 DPLN = 0 |
| ITR = 0 COS = 10 LCOSV = 1 |
| LCOSD = 1 CCT = PRI2 DESTNO = 14 |
| SEGMENT = 1 DEDSCC = DEDSVC = NONE |
| FACILITY = DITIDX = SRTIDX = |
| TRTBL = GDTR SIDANI = N ATNTYP = CO |
| CBMATTR = NONE NWMUXTIM = 10 TCHARG = N |
| SUPPRESS = 0 DGTPR = CHIMAP = N |
| ISDNIP = ISDNNP = |
| PNPL2P = PNPL1P = PNPAC = |
| TRACOUNT = 31 SATCOUNT = MANY NNO = 1 -1 -14 |
| ALARMNO = 2 FIDX = 1 CARRIER = 1 |
| ZONE = EMPTY COTX = 1 FWDX = 1 |
| DOMTYPE = DOMAINNO = TPROFNO = |
| INIGHT = CCHDL = |
| UUSCCX = 16 UUSCCY = 8 FNIDX = 1 |
| CLASSMRK = EC & G711 & G729OPT SRCGRP = |
| TCCID = |
|---------------------------------------------------------------------------|
| BCNEG = N BCGR = 1 LWPAR = 3 |
| LWPP = 0 LWLT = 0 LWPS = 0 |
| LWR1 = 0 LWR2 = 0 |
| SVCDOM = |
| BCHAN = 1 && 30 |
| |
+---------------------------------------------------------------------------+
AMOUNT OF B-CHANNELS IN THIS DISPLAY-OUTPUT: 30

AMO-TDCSU-111 DIGITAL TRUNKS
DISPLAY COMPLETED;
<reg-tdcsu;
REG-TDCSU;
H500: AMO TDCSU STARTED
ADD-TDCSU:NEW ,1-02-109-1,1,0,0,0,10,1,1,"PRI2 ",14
,ETSI,1,,NONE,,,,GDTR,N,CO,NONE,N,0,
,,,,,
,31,MANY,1-1-14,2,1,1,EMPTY,1,1,N,
,,,,,16,8,1,10,,EC&G711&G729OPT
,"",14,CIR,Y,S2COD,
1&&30
,N,1,3,0,0,0,0,0
;
ADD-TDCSU:NEW ,1-02-109-0,30,0,2,3,10,1,1," ",0
,ETSI,8,,NONE,,,,GDTR,N,TIE,NONE,N,4,199
,,,,,
,31,MANY,1-1-130,0,1,1,EMPTY,30,1,N,
,,,,,16,8,1,10,,EC&G711&G729OPT
,"",13,CIR,Y,S2CONN,
1&&30
,N,1,0,0,0,0,0,0
;

AMO-TDCSU-111 DIGITAL TRUNKS
REGENERATE COMPLETED;
<
--------------------------------------------------------------------------------
Connection closed to: direct 2012-11-02 09:30:50

 

[Iamnothere]

The TDCSU parameter "SUPPRESS" is set to "4", and parameter "DGTPR" is set to "199"
If the telco is sending "2567xxx", then your TDCSU config is stripping the first 4 digits ("2567"), which leaves only the "xxx". Then your TDCSU is inserting "199" in front of the "xxx". Therefore your 4K is trying to process the number "199xxx".

I doubt this is what you really intended. If you wanted to route ALL calls to station "199", then you should set "SUPPRESS" to "7" if that is possible, which removes all of the received digits. THEN, your DGTPR of "199" should route all calls to "199".

TDCSU -> SUPPRESS is performed first, then DGTPR is performed.

Good luck.

 

[AbdulRashid]

Dear Vijaydlj,

plase define in TDCSU/SUPPRESS=4, do not define any thing in DGTPR.
it will work. look at my configuration they are sending 8 digits and we have suppress 4 digits.

DIS-TDCSU:1-4-79-0;
H500: AMO TDCSU STARTED
+------------------------ DIGITAL TRUNK (FORMAT=L) -------------------------+
| DEV = S2COD PEN = 1-04-079-0 TGRP = 201 |
|---------------------------------------------------------------------------|
| PROTVAR = ETSI INS = Y SRCHMODE = CIR |
| COTNO = 101 COPNO = 201 DPLN = 0 |
| ITR = 0 COS = 21 LCOSV = 11 |
| LCOSD = 1 CCT = 32592197 I/C DESTNO = 0 |
| SEGMENT = 1 DEDSCC = DEDSVC = NONE |
| FACILITY = DITIDX = SRTIDX = |
| TRTBL = GDTR SIDANI = N ATNTYP = CO |
| CBMATTR = NONE NWMUXTIM = 10 TCHARG = N |
| SUPPRESS = 4 DGTPR = CHIMAP = N |
| ISDNIP = 00 ISDNNP = |
| PNPL2P = PNPL1P = PNPAC = |
| TRACOUNT = 31 SATCOUNT = MANY NNO = |
| ALARMNO = 2 FIDX = 1 CARRIER = 1 |
| ZONE = EMPTY COTX = 101 FWDX = 1 |
| DOMTYPE = DOMAINNO = TPROFNO = |
| INIGHT = CCHDL = |
| UUSCCX = 16 UUSCCY = 8 FNIDX = 1 |
| CLASSMRK = EC & G711 & G729AOPT SRCGRP = |
| TCCID = SECLEVEL = TRADITIO |
|---------------------------------------------------------------------------|
| BCNEG = N BCGR = 1 LWPAR = 1 |
| LWPP = 0 LWLT = 0 LWPS = 0 |
| LWR1 = 0 LWR2 = 0 |
| DMCALLWD = DMCSEC = VNNO = |
| SVCDOM = |
| BCHAN = 1 && 30 |
| |
+---------------------------------------------------------------------------+

 

[sbcsu]

CHA-TDCSUEN=1-4-79-0,DGTPR=*,SUPPRESS=4;

 

[vijaydlj]

hey,

CHA-TDCSUEN=1-4-79-0,DGTPR=*,SUPPRESS=4;

its not working. on dialing 2567XXX, (where XXX-100 to 700 provided By Central office) the caller Heard Busy tone. on force dialing, all the calls goes to the particular forced given numbers ( as DGTPR=XXX).

plz help.
Thanks

 

[donb01]

Myself, being the lazy type, considering no calls are coming in on this line anyway, would just contact the CO and tell them to only send you the last 3 digits. (That part of the) problem solved - no translation needed...

 

[sbcsu]

Find out/decide how many digits the CO are sending in to your circuit
then you know how many to add/delete on the circuit

 

[AbdulRashid]

Dear,
first of all atleast define in WABE/GEN/CD=100/DAR=ATNDDID.
now dail 2567100,your incoming call will reach to operator console.
if ext=100 in use then you can define any easy number in CD=xxx.

Now check your CLI. Do you receive your city code infront of your CLI or not.
If yes then icrease your same digit in TDCSU/SUPPRESS.

If problem is still there then change your SUPPRESS value first 3 then 4 then 5 then 6 one by one, I am sure you will get success on any one point.

 

[vijaydlj]

thanks to all.

finally we resolve the problem related to DINU2.

thanks ones again.