Help from before with T1's

[elhnet2000]

Early I wrote a post dealing with a T1. It isn't ISDN. In doing the t1channels command, I get the following output. I am sure that this is the reason why I get dead air when dialing the dial in number. They should be idle. Any help would be great.


T1 channels allocated/in-use:
(dvOp dvUpSt dvRq sAdm nailg)
Channel { { 3 1 1 } 1 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 2 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 3 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 4 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 5 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 6 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 7 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 8 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 9 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 10 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 11 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 12 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 13 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 14 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 15 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 16 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 17 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 18 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 19 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 20 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 21 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 22 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 23 } (Up Assign UP UP 00000)
Channel { { 3 1 1 } 24 } (Up Assign UP UP 00000)