Help For the international call barring in 1000E

[JAAGB]

Hi,
I was to make a restriction for making the international call barring pls any one help for this..this is on 1000E

 

[dlesap]

It's exactly the same as in Meridian or CS1000S, CS1000M
LD 49
FCR

Then apply to NCOS of the set

 

[JAAGB]

I am using the AC2 I cant use the FCR for AC2

 

[dlesap]

Yes you can!
Why not?

 

[JAAGB]

the calls i am not able to barr...for example ncos 1 Deny and allowes only 07 but that extension can make international also

 

[dlesap]

Sure... Dialing plans have to be different to join external number for AC1 anc AC2. If no difference, you may insert digits the make the difference...

 

[acewarlock]

This is my info for international calling.

SPN 0
FLEN 0
INPL NO
RLI 1
SDRR NONE
ITEI NONE
------------------------------------------------------

RLI 1
ENTR 0
LTER NO
ROUT 0
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 1
DMI 0
FCI 0
FSNI 0
SBOC NRR
OHQ YES
CBQ YES

ISET 0
NALT 5
MFRL 7
OVLL 0
------------------------------------------------------

NCOS 7

EQA NO
FRL 7
RWTA NO
NSC NO
OHQ YES
CBQ YES
RETT 0
RETC 0
ROUT I
RADT 0
SPRI 0
MPRI 0
PROM 0

 

[dlesap]

NCOS configuration have to be read in LD 49 FCR CRNO 7

 

[JAAGB]

i want to block the international calls

 

[acewarlock]

I have never used LD 49 in 25 years, if I allow a user to dial International calls then he can call anywhere. Someday they might want to restrick it more, but for now they don't.

 

[dlesap]

If NCOS is equal or higher than FRL of the used RLI, call is allow.
If NCOS is lower than FRL of the used RLI, call is restricted.

 

[acewarlock]

I change the NCOS to 7 on the Phone to allow a phone to make International calls, anything lower will block it.

 

[JAAGB]

Thanks all your help i am managed to do that..again thanks all