Help for Site to site Tunnel setup!

[poolgun]

we have two office, one is use CISCO router 3825 , my site is Netgear FVS318. I fellow the information step by step to setup my router Netgear.
I see the log file: ICMP packet - source 192.168.0.2
Destination xx.xx.xxx.xx [service access request successful
ICMP type: 8 code:0 form Lan.

But I can not ping this computer,
It alway say: Request time out!

Thanks for your help!

Danny

 

[poolgun]

Msg from router VPN status:
[2005-08-25 13:00:14]<POLICY: 53connection> PAYLOADS: SA
[2005-08-25 13:00:35]**** SENT OUT INFORMATIONAL EXCHANGE MESSAGE ****
[2005-08-25 13:00:35]<POLICY: 53connection> PAYLOADS: DEL

What's that mean? DEL is delete?

Dan

 

[nige1121]

we're having a similar problem but ours is intermittent, sometimes it works and sometimes it doesnt

Nigel

 

[poolgun]

But I still can not ping that server?

Thanks!

Dan

 

[poolgun]

BTW Would you mind to send me the configureation instruction?
my address: dannyf@myqvs.com

Thanks a lot!

Dan

 

[Tommyb0y]

Well, that error could mean the SA is not building properly. Also could mean your ACLs on each side do not match, verify that it is indeed the same encryption hash, group ect on both sides. Also make sure the ACL matches, do you see either phase l or phase ll come up? Do you have access to loggs on the Cisco side of things?

 

[poolgun]

No! The other is our client site!
I think it should be a problem on my forwarding port setup?
I do Not know how to set it up on my computer?
Does anybody know the port of VPN outbound and in bound??

Thnaks!

Dan