Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help for Site to site Tunnel setup!

Status
Not open for further replies.

poolgun

MIS
Feb 17, 2005
45
US
we have two office, one is use CISCO router 3825 , my site is Netgear FVS318. I fellow the information step by step to setup my router Netgear.
I see the log file: ICMP packet - source 192.168.0.2
Destination xx.xx.xxx.xx [service access request successful
ICMP type: 8 code:0 form Lan.

But I can not ping this computer,
It alway say: Request time out!

Thanks for your help!

Danny
 
Msg from router VPN status:
[2005-08-25 13:00:14]<POLICY: 53connection> PAYLOADS: SA
[2005-08-25 13:00:35]**** SENT OUT INFORMATIONAL EXCHANGE MESSAGE ****
[2005-08-25 13:00:35]<POLICY: 53connection> PAYLOADS: DEL

What's that mean? DEL is delete?

Dan

 
we're having a similar problem but ours is intermittent, sometimes it works and sometimes it doesnt

Nigel
 
But I still can not ping that server?

Thanks!

Dan
 
BTW Would you mind to send me the configureation instruction?
my address: dannyf@myqvs.com

Thanks a lot!

Dan
 
Well, that error could mean the SA is not building properly. Also could mean your ACLs on each side do not match, verify that it is indeed the same encryption hash, group ect on both sides. Also make sure the ACL matches, do you see either phase l or phase ll come up? Do you have access to loggs on the Cisco side of things?
 
No! The other is our client site!
I think it should be a problem on my forwarding port setup?
I do Not know how to set it up on my computer?
Does anybody know the port of VPN outbound and in bound??

Thnaks!

Dan
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top