Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help for change a DECT on Md110

Status
Not open for further replies.

briosa

IS-IT--Management
Nov 27, 2013
30
PT
Good morning,

I need to change a DECT which died.
How can i change by new one? Which steps i need to do?

Thanks
 
Hi,
if you have MD110/TSW
CXAKP:DIR=XXXX; print old DECT parameter
CXAKE:DIR=XXXX;
Read on new DECT the IPEI
CXAKI:DIR=YYYY,AUTKEY=ZZZZ,IPEI="IPEIofNEWdect";

\Satellite1900
 
How can i know the ipei?
 
what kind of model?
Example:
DT288
To find the IPEI code of your telephone:
• Select Information in the DT288 menu (Use arrow/scroll keys).
• Press YES.
• Select ShowIPEI (Use arrow/scroll keys).
• Press YES.
• Enter your PIN code: The PIN code has default value 0000.
• The IPEI code is displayed. Once the telephone is blocked it is impossible to read the IPEI code in the telephone. Therefore, write down the IPEI code but keep the code secret to prevent misuse of your telephone.


\Satellite1900
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top