We had a potential outside service vender dial into our 61C to gather the needed information for a quote. Now I need to change the password however, I want to make sure that I change it the correct way. I know on NEC I had to change the password for the various levels of loging in. Can someone walk me through this please, I want to lock this back down pretty quick. Thank You Again
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Help changing password on 61C 1
- Thread starter Brutus82
- Start date
-
1
- #2
tnphoneman
Vendor
unplug the modem until needed or passwords are changed. Quickest way to lock it down.
Signature===========================================
Aastra Authorized Reseller
Signature===========================================
Aastra Authorized Reseller
- Thread starter
- #4
You must know the 2nd level password to perform this.
Go to LD 17
REQ: CHG
TYPE: PWD
PWD2: (enter your 2nd level password)
LNAME OPTION: hit return
NPW1: (enter new 1st level password if desired)
LOGIN NAME: (enter new login name if login names are used and if desired)
NPW2: (enter new 2nd level password if desired)
LOGIN NAME: (enter new login name if login names are used and if desired)
LAPW: (hit return all the way out)
War Eagle!!
Go to LD 17
REQ: CHG
TYPE: PWD
PWD2: (enter your 2nd level password)
LNAME OPTION: hit return
NPW1: (enter new 1st level password if desired)
LOGIN NAME: (enter new login name if login names are used and if desired)
NPW2: (enter new 2nd level password if desired)
LOGIN NAME: (enter new login name if login names are used and if desired)
LAPW: (hit return all the way out)
War Eagle!!
- Thread starter
- #6
Question;
When I login to the terminal or use "system terminal" in OTM I use something similar to this:
User ID: Abcdefg1
Password: 1234
So using the post above would I enter the following?
Go to LD 17
REQ: CHG
TYPE: PWD
PWD2: 1234
LNAME OPTION: hit return
NPW1: hit return
LOGIN NAME: hit return
NPW2: 4321 my new pass
LOGIN NAME: Abcdefg1 (Same as before)
LAPW: (hit return all the way out)
When I login to the terminal or use "system terminal" in OTM I use something similar to this:
User ID: Abcdefg1
Password: 1234
So using the post above would I enter the following?
Go to LD 17
REQ: CHG
TYPE: PWD
PWD2: 1234
LNAME OPTION: hit return
NPW1: hit return
LOGIN NAME: hit return
NPW2: 4321 my new pass
LOGIN NAME: Abcdefg1 (Same as before)
LAPW: (hit return all the way out)
- Thread starter
- #8
Hopefully, you have the PWD2. All hope is not lost if you don't though.
~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]
~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]
- Thread starter
- #10
Made the change to NWP1 thanks to all your help however, tried to make change in OTM and noticed it doesn't work now because it's trying to log in using the old password.
Tried in OTM Navigator changing "Security/Change Password" but that appears to be just the password for Navigator itself. Where in OTM do I need to change the password it uses when connecting to make changes?
Thank You
Tried in OTM Navigator changing "Security/Change Password" but that appears to be just the password for Navigator itself. Where in OTM do I need to change the password it uses when connecting to make changes?
Thank You
- Thread starter
- #11
- Status
Similar threads
