Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help adding ports

Status
Not open for further replies.
iggzaplaya

iggzaplaya

MIS
Sep 29, 2006
11
US
I need to activate ports that are already physically wired to our switch. What information do I need to perform this? Also, I'm not sure of the commands I should use. Any help is appreciated
 
Sort by date Sort by votes
Stations. I have ports where there are no dial tones. I need to activate these.
 
Upvote 0 Downvote
If you need to create a station, try "add station" command, enter the port number (e.g. 1D0808) to the "Port" field of the "STATION" form (on page 1). Also make sure the "Type" matches the Port.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Juan_Moct
  • Locked
  • Question
AVAYA TN793CP PORTS ISSUES 1
Replies
1
Views
112
lopes1211
lopes1211
Y
  • Locked
  • Question
AMS Wav to CM? Help please
Replies
6
Views
434
YDCTwinkleToes
Y
mnealtx
  • Locked
  • Question
Help with decommissioning Avaya G3R
Replies
7
Views
188
mnealtx
mnealtx
Chupp62
  • Locked
  • Question
Adding Guest login to 9630/9650 phones
Replies
0
Views
60
Chupp62
Chupp62
Vidmine
  • Locked
  • Question
Adding DID numbers to a SIP trunk 1
Replies
3
Views
171
jimbojimbo
jimbojimbo

Part and Inventory Search

Sponsor

Back
Top