Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help 2000 ips to 2000ips over Internet

Status
Not open for further replies.

donporter

IS-IT--Management
Aug 6, 2004
140
US
I have a VPN setup for an IP address to vpn over to my other location. Before I start changing my IP address on one side I want to run it down with someone.

2000ips on both sides with CCIS
LAN "A" IP 192.1.1.213 going to change it to 192.22.1.213 and Gateway 192.22.1.1
leaving 8+24IPLA at 192.1.1.214
Changing CCWX to look for 192.22.1.213
Changing GNAV PRO to look at 192.22.1.213

LAN "B" IP 192.2.1.6 going to change CCIS to look for 192.22.1.213
Leaving everything else

Just going to check to see if it works.
 
1. Are you changing addresses in the CCWX and NAV PC's?
2. The CCWX PC looks at the PBX CPU address for ACD operation.
3. The Navigator looks at the CCWX PC for Agent inforamtion.
4. The GNAV PRO Clients look to the Navigator PC for real time and reports.
 
No
The ccwx and gnavpro can see the new IP address at each local side.
I know that I have to change the IP that CCWX looks for.

So 0b changes the IP of the PBX (00-ip 01-sub 02-gw)

Where do go to change the other site? so if have the node a's new IP address.

VM doesn't need the IP addrees right.
 
I tried to change the IP on 0B but after I reset the could not ping it. What the hell?
The switches saw the connection.

I am missing something.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top