Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hello we have a definity G3r rel v 2
- Thread starter cmawbey
- Start date
-
2
- #2
if you have Release 6 issue 2 or higher you can make an
ISDN BRI Trunk for your isdn-faxserver.
check first if in the system customer options ISDN BRI trunks is set to Y. (i think page 2)
then you need also a TN556 board.
If you have all of this let me now and i will
give you all the settings for building the bri-trunk.
Greets, Bob Fox
ISDN BRI Trunk for your isdn-faxserver.
check first if in the system customer options ISDN BRI trunks is set to Y. (i think page 2)
then you need also a TN556 board.
If you have all of this let me now and i will
give you all the settings for building the bri-trunk.
Greets, Bob Fox
Sorry for the late reply Scott
First thing you have to do is add your bri trunk board.
add bri-trunk-board xxxxx (expl. 01a08)
than you can give it a name like faxsrv
companding mode: a-law or mu-law (dont know what you use)
port 1: network
protocol:i use etsi
Tei: auto (if auto not works you can try 0)
Time fill: ones
port 2: network
protocol:i use etsi
Tei: auto (if auto not works you can try 0)
Time fill: ones
Now you can add a trunk
Group type: ISDN
Service type: tie (Some faxservers work only with tandem)
Supplementary service protocol: C
( C=etsi, B= 10, 12 and 13, For all other use A )
page 2 i have only the maintenance on Y
page 3
Service/feature: tie (or tandem like page 1)
Called len: 4
CPN/BN: none
next page(members page)
1: 01a0801 (port 1 channel B1)
2: 01a0817 (port 1 channel b2)
3: 01a0802
4: 01a0818
this is like i have set up a faxserver.
i hope this will help you to set up your faxserver.
Greets, Bob
First thing you have to do is add your bri trunk board.
add bri-trunk-board xxxxx (expl. 01a08)
than you can give it a name like faxsrv
companding mode: a-law or mu-law (dont know what you use)
port 1: network
protocol:i use etsi
Tei: auto (if auto not works you can try 0)
Time fill: ones
port 2: network
protocol:i use etsi
Tei: auto (if auto not works you can try 0)
Time fill: ones
Now you can add a trunk
Group type: ISDN
Service type: tie (Some faxservers work only with tandem)
Supplementary service protocol: C
( C=etsi, B= 10, 12 and 13, For all other use A )
page 2 i have only the maintenance on Y
page 3
Service/feature: tie (or tandem like page 1)
Called len: 4
CPN/BN: none
next page(members page)
1: 01a0801 (port 1 channel B1)
2: 01a0817 (port 1 channel b2)
3: 01a0802
4: 01a0818
this is like i have set up a faxserver.
i hope this will help you to set up your faxserver.
Greets, Bob
- Thread starter
- #6
- Thread starter
- #7
Bob
do we need to set this up as ISDN trunks, we thought we could just put the ISDN faxserver on the end of 2 BRI's (extensions) from the switch..could you expain in more detail please why we need to do it via trunks..
THX
colin Colin
do we need to set this up as ISDN trunks, we thought we could just put the ISDN faxserver on the end of 2 BRI's (extensions) from the switch..could you expain in more detail please why we need to do it via trunks..
THX
colin Colin
- Status
