Hello my Siemens Exchange LTU 42

[Pank19]

Hello my Siemens Exchange LTU 42 Q2305-X40 card failed.
No spare Someone mentioned that I can used X35 card and Have to use CHANGE-UCSU:AP,1,42,"Q2305-X35",,,,,,,,,60;
This command will change X40 to X35.

I did the same but still my Telephone exchange rack is in fault.

Can someone help me or tell me next step

 

[sbcsu]

How do you know that the Q2305-X40 Failed ?

 

[Pank19]

X40 card FDX link both network port have no communication.
Network cable is tested and when I plugged X35 card it start flashing on network port but X40 is not giving any response.

anyhelp on this

 

[Pank19]

after this command CHANGE-UCSU:AP,1,42,"Q2305-X35",,,,,,,,,60;
It shows change completed but status shows for all related phones are UNACH

 

[masviss]

Before connecting AP with HG3575 to the processor , you need to do the initial programming . To do this, you can use the cbl file (Macro->Start CBL->Apps->NCUI.cbl) or manually via COM port "Service" on the board NCUI

IPDA: Function and Configuration
EN4407EN00EN-0002

 

[Pank19]

I am new to siemens . Can someone help me with step by step.
How to set up X35 card

 

[Pank19]

can you send all related info to my mail Id

if you agree I will pass my mail on this forum

 

[masviss]

I had sent the file.

 

[Pank19]

Thank you masviss file well recived