Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hello I would ask you if the dvode
- Thread starter hasnaoui
- Start date
You will find the answer in the source file - e.g.see:
Code:
C. If the problem is stiff, you are encouraged to supply the Jacobian
directly (MF = 21 or 24), but if this is not feasible, DVODE will
compute it internally by difference quotients (MF = 22 or 25).- Thread starter
- #3
Thank you for this infromation.
Ok, when I chose MF=22
some errors appear during the execution like
DVODE-- At current T (=R1), MXSTEP (=I1) steps
taken on this call before reaching TOUT
In above message, I1 = 500
In above message, R1 = 0.4309613453595D+01
Error halt: ISTATE = -1
Ok, when I chose MF=22
some errors appear during the execution like
DVODE-- At current T (=R1), MXSTEP (=I1) steps
taken on this call before reaching TOUT
In above message, I1 = 500
In above message, R1 = 0.4309613453595D+01
Error halt: ISTATE = -1
- Status