Hello everyone, I want command t 2

[activenew]

Hello everyone,

I want command to check cards in my system(WinFiol-MD110) , also how many card i have and type of cards.

Thanks

 

[activenew]

Also i want check card status , because sometimes i have seen red light on cards

 

[whosrdaddy]

CNLIPEV=YES, LIM=ALL; will print boards and their status.

/Daddy

-----------------------------------------------------
Helping people is my job...

 

[activenew]

thanks for reply , please check the result and explain to me
<CNLIPEV=YES, LIM=ALL;

LIM CONFIGURATION
LIM NUMBER 1
LIM CONTROL LIM CONTROL NUMBER OF SERVICE
SYSTEM SIDE SYSTEM STATE PCM-LINKS STATE LIM
A STANDBY
B EXECUTING 0 ACTIVE
MEMORY MEMORY MEMORY SPARE
VOLUME SPARE AFTER PACKING
65535 KB 10466 KB 10466 KB
BUAR1 4111 KB BUAR2 3185 KB

DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
001-0-00 NOT EQUIPPED
001-0-01 NOT EQUIPPED
001-0-02 NOT EQUIPPED
001-0-03 NOT EQUIPPED
001-0-10 102 32 SYSTEM BLOCKED
001-0-20 117 32 ACTIVE
001-0-30 117 32 ACTIVE
001-0-40 118 32 ACTIVE
001-0-50 121 32 ACTIVE
001-0-60 42 32 ACTIVE
001-0-70 NOT EQUIPPED
001-0-71 NOT EQUIPPED
001-0-72 NOT EQUIPPED
001-0-73 42 1 ACTIVE
001-1-00 NOT EQUIPPED
001-1-01 NOT EQUIPPED
001-1-02 NOT EQUIPPED
001-1-03 NOT EQUIPPED
001-1-10 102 32 ACTIVE
001-1-20 117 32 PASSIVE
001-1-30 118 32 ACTIVE
001-1-40 118 32 ACTIVE
001-1-50 124 12 ACTIVE
001-1-52 NOT EQUIPPED
001-1-53 NOT EQUIPPED
001-1-60 42 32 ACTIVE
001-1-70 NOT EQUIPPED
001-1-71 NOT EQUIPPED
001-1-72 NOT EQUIPPED
001-1-73 42 1 ACTIVE
001-2-00 NOT EQUIPPED
001-2-01 NOT EQUIPPED
001-2-02 NOT EQUIPPED
001-2-03 NOT EQUIPPED
001-2-10 106 16 ACTIVE
001-2-12 NOT EQUIPPED
001-2-13 NOT EQUIPPED
001-2-20 124 12 ACTIVE
001-2-22 NOT EQUIPPED
001-2-23 NOT EQUIPPED
001-2-30 118 32 ACTIVE
001-2-40 118 32 ACTIVE
001-2-50 118 32 ACTIVE
001-2-60 118 32 ACTIVE
001-2-70 NOT EQUIPPED
001-2-71 NOT EQUIPPED
001-2-72 NOT EQUIPPED
001-2-73 NOT EQUIPPED
001-3-00 NOT EQUIPPED
001-3-01 NOT EQUIPPED
001-3-02 NOT EQUIPPED
001-3-03 NOT EQUIPPED
001-3-10 NOT EQUIPPED
001-3-11 NOT EQUIPPED
001-3-12 NOT EQUIPPED
001-3-13 NOT EQUIPPED
001-3-20 NOT EQUIPPED
001-3-21 NOT EQUIPPED
001-3-22 NOT EQUIPPED
001-3-23 NOT EQUIPPED
001-3-30 102 32 ACTIVE
001-3-40 118 32 ACTIVE
001-3-50 118 32 ACTIVE
001-3-60 118 32 PASSIVE
001-3-70 NOT EQUIPPED
001-3-71 NOT EQUIPPED
001-3-72 NOT EQUIPPED
001-3-73 NOT EQUIPPED


END
<

 

[whosrdaddy]

It seems that the TMU board at 1-0-10 (boardid 102) has a problem, try to reseat the board to see if it helps.
These commands may help too:

RFBOI:BPOS=1-0-10;
Y;
BLDBE:BPOS=1-0-10, ALLFM=YES;

/Daddy

-----------------------------------------------------
Helping people is my job...

 

[activenew]

More than 5 times i have seen red light on this card.
When reach my office i will run this command


Thanks for support

 

[activenew]

please check result after ran:
RFBOI:BPOS=1-0-10;
Y;
BLDBE:BPOS=1-0-10, ALLFM=YES;


<CNLIPEV=YES, LIM=ALL;

LIM CONFIGURATION
LIM NUMBER 1
LIM CONTROL LIM CONTROL NUMBER OF SERVICE
SYSTEM SIDE SYSTEM STATE PCM-LINKS STATE LIM
A STANDBY
B EXECUTING 0 ACTIVE
MEMORY MEMORY MEMORY SPARE
VOLUME SPARE AFTER PACKING
65535 KB 10466 KB 10466 KB
BUAR1 4111 KB BUAR2 3185 KB

DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
001-0-00 NOT EQUIPPED
001-0-01 NOT EQUIPPED
001-0-02 NOT EQUIPPED
001-0-03 NOT EQUIPPED
001-0-10 102 32 PASSIVE
001-0-20 117 32 ACTIVE
001-0-30 117 32 ACTIVE
001-0-40 118 32 ACTIVE
001-0-50 121 32 ACTIVE
001-0-60 42 32 ACTIVE
001-0-70 NOT EQUIPPED
001-0-71 NOT EQUIPPED
001-0-72 NOT EQUIPPED
001-0-73 42 1 ACTIVE
001-1-00 NOT EQUIPPED
001-1-01 NOT EQUIPPED
001-1-02 NOT EQUIPPED
001-1-03 NOT EQUIPPED
001-1-10 102 32 ACTIVE
001-1-20 117 32 PASSIVE
001-1-30 118 32 ACTIVE
001-1-40 118 32 ACTIVE
001-1-50 124 12 ACTIVE
001-1-52 NOT EQUIPPED
001-1-53 NOT EQUIPPED
001-1-60 42 32 ACTIVE
001-1-70 NOT EQUIPPED
001-1-71 NOT EQUIPPED
001-1-72 NOT EQUIPPED
001-1-73 42 1 ACTIVE
001-2-00 NOT EQUIPPED
001-2-01 NOT EQUIPPED
001-2-02 NOT EQUIPPED
001-2-03 NOT EQUIPPED
001-2-10 106 16 ACTIVE
001-2-12 NOT EQUIPPED
001-2-13 NOT EQUIPPED
001-2-20 124 12 ACTIVE
001-2-22 NOT EQUIPPED
001-2-23 NOT EQUIPPED
001-2-30 118 32 ACTIVE
001-2-40 118 32 ACTIVE
001-2-50 118 32 ACTIVE
001-2-60 118 32 ACTIVE
001-2-70 NOT EQUIPPED
001-2-71 NOT EQUIPPED
001-2-72 NOT EQUIPPED
001-2-73 NOT EQUIPPED
001-3-00 NOT EQUIPPED
001-3-01 NOT EQUIPPED
001-3-02 NOT EQUIPPED
001-3-03 NOT EQUIPPED
001-3-10 NOT EQUIPPED
001-3-11 NOT EQUIPPED
001-3-12 NOT EQUIPPED
001-3-13 NOT EQUIPPED
001-3-20 NOT EQUIPPED
001-3-21 NOT EQUIPPED
001-3-22 NOT EQUIPPED
001-3-23 NOT EQUIPPED
001-3-30 102 32 ACTIVE
001-3-40 118 32 ACTIVE
001-3-50 118 32 ACTIVE
001-3-60 118 32 PASSIVE
001-3-70 NOT EQUIPPED
001-3-71 NOT EQUIPPED
001-3-72 NOT EQUIPPED
001-3-73 NOT EQUIPPED


END


Still there is red light on TMU

 

[whosrdaddy]

Did you reseat the board like I told you?

-----------------------------------------------------
Helping people is my job...

 

[activenew]

No, because i don't know to do that.


Thanks

 

[mautub]

TMU board doesn't have leds!!!!

 

[himdp]

activenew, to reseat the board (in this case 1-0-10) you withdraw it from the magazine then push it back in to do a power off reset.

 

[YZeglam]

the board with LEDs are LPU5 or HDU7 not a TMU

 

[himdp]

TMU/12 does have an LED on the front as do TLU83, ELU31, ELU33 and ELU34.

 

[activenew]

i have attached screenshot from my system it shown the red light on TMU please check it and advise me accordingly.


Thanks for your help

 

[himdp]

Hi activenew,
there was no need for that really, most of us know that boards in the classic magazine have LEDs it was inexperienced posters trying to "help" who have confused the issue.
The light is an indicator that the board is out of service as shown in the BLFDP.
Have you tried to reseat the board as suggested by whosrdaddy?

 

[activenew]

thanks himdp for your support,

I know himdp you don't need this screenshot , but this for me to clearify my confused
as of you know my knowledge not much in this filed ,please be patient , i will upload another picture to clarify me where this board? I think this a chance to understand this system.


Thanks

 

[himdp]

The TMU is a Tone and Multi Party (conference) Unit. It has no connection to the MDF as it is purely a system resource.
To reseat the board you must go to the board shown in picture 1 and loosen the top and bottom screws with a torx screwdriver.
Using the lower tab on the card, lever the board from the magazine just far enough to diconnect the rear connector (the red light will go out).
Now gently push the board back into the magazine. After a short initialisation period the red light should go out. Do a BLPDP and hopefully the board will show as active.

 

[activenew]

I will try to reseat the board , i will feedback the result.

Thanks for your help.

 

[activenew]

could please provide me command to get Ext connected with this Board(1-0-10), because if i get the ext number i can find board location
then reseat it.

 

[whosrdaddy]

Did you read what himdp wrote?
I suspect that english is not your mother language (nor is it mine) but are you serious?
It is really simple, the board with the RED led labeled TMU must be reseated (procedure explained in detail by himdp)??

It is this board (red circle)

/Daddy

-----------------------------------------------------
Helping people is my job...