Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HEAT: Hours of Operation

Status
Not open for further replies.

LouiseR

MIS
Nov 18, 2003
17
GB
Hello

If the hours of operation are set at 7am to 6pm and a call is opened at 09:00 yesterday, closed at 15:00 today, is the total time the call is open 17 hours (based on hours of operation) or is it based on the 24 hour clock?

Does the Maximum resolution time take the hours of operation into account?

I hope you understand what I am getting at!

Thanks,
Louise.
 
Hi Richard

I meant 9am to 6pm (day 1) = 9 hours, then 7am to 3pm (day 2) is 6 hours which is 17 hours in total.

Where do I set up the resolution time to take into account the helpdesk hours?

When calculating the time the call has been open, can I set this to take into account the helpsdesk hours?

I want to compare the time the call has been open to the Max Res time.

Thanks again,
Louise.

 
Sorry!

9am to 6pm (day 1) = 9 hours, then 7am to 3pm (day 2) is 8 hours which is 17 hours in total.

Louise
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top