PsychosonicSid
Technical User
Quantum Fireball 10Gb drive on a Gigabyte board with Intel chipset. Running Win 98SE.
A few weeks ago, my HDD developed a sound that sounds that is difficult to describe! Sounds like a loud writing, then a ping! This happens at random timings. At which point the PC freezes, and the dreaded blue screen comes up "Unable to write to drive x:"
I have tried:
a) Norton diagnostics, and Anti-Virus
b) Removed, reseated memory
c) Removed individual memory sticks (2 x 64Mb)
d) Reloaded Win98SE
e) Run Quantum Diagnostics tool (All Passes)
f) Bought new 20Gb HDD, which is now master, so far seems okay!
g) Replaced 10Gb as Slave, and this does the same thing but only if trying to write to this drive, system still behaves as the new drive is the master.
h) Noticed 4 devices sharing the same IRQ, no conflict, but one of them is the Bus master! Is this the probelm?
i) Tried running Scandisk, but this crashes as it gets to a set point on the drive?
So is the drive ready for the bin or is it worth formatting and trying again?
Any advise welcome!
A few weeks ago, my HDD developed a sound that sounds that is difficult to describe! Sounds like a loud writing, then a ping! This happens at random timings. At which point the PC freezes, and the dreaded blue screen comes up "Unable to write to drive x:"
I have tried:
a) Norton diagnostics, and Anti-Virus
b) Removed, reseated memory
c) Removed individual memory sticks (2 x 64Mb)
d) Reloaded Win98SE
e) Run Quantum Diagnostics tool (All Passes)
f) Bought new 20Gb HDD, which is now master, so far seems okay!
g) Replaced 10Gb as Slave, and this does the same thing but only if trying to write to this drive, system still behaves as the new drive is the master.
h) Noticed 4 devices sharing the same IRQ, no conflict, but one of them is the Bus master! Is this the probelm?
i) Tried running Scandisk, but this crashes as it gets to a set point on the drive?
So is the drive ready for the bin or is it worth formatting and trying again?
Any advise welcome!