Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HBAnyware

Status
Not open for further replies.
Chris78

Chris78

Instructor
Aug 24, 2003
27
FR
I got a very strange issue,

On a Windows2000 SP3 with LP9002L-E (driver 2.21a7 + firmware 3.90a7) with Powerpath 3.0.5, we have some ghost luns under HBAnyware (luns 16384, 16386, 16391, 16392, 16393, 16394, 16395, 16396, 16397, 16398, 16399, 16504, 16505, 16506, 16507) !!!

Any ideas would be very appreciated !

TIA

Chris
 
Sort by date Sort by votes
did you add HBAs? or LUNs? what did you do?
how is your configuration?

cheers.
 
Upvote 0 Downvote
Hi Chacalinc and thanks for the feed-back,

In fact, we got this situation since the begining of the installation. The configuration is as follow :

Symmetrix #xxxx
| |
FA-WW-port X FA-YY-port Z
| |
DS16B DS16B
| |
LP9002L-E LP9002L6E
Windows2000-SP3

And by seaching, find that FAs (FA-WW-port X and FA-YY-port Z) got the Vbit set... So perhaps it could explain why we got some very strange luns under HBAnyware)
Since I try this test, I will give you a feed-back.

Christian
 
Upvote 0 Downvote
HBAnywhere is just for HBA Monitoring. Go to elxcfg.exe and post the settings or your HBA.

For example,
Topology = Point to Point
Then I would post what is checked on the right side
and so on...
 
Upvote 0 Downvote
Ok test done
VBit on = HBAnyware show some LUN 16XXX
VBit off = HBAnyware show normal LUN X

Thanks for your answer

Christian
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top