Having problems with the " **** "

[tyro03]

I´m newbie into the Meridian 1 Option 11, so I hope to make myself clear, suddenly after I made this consultation, two thing happened, the first one, everything is deployed with a row of space between lines, while in the past every line was followed one after another, the second problem is that I can´t logout of a overlay with the " **** " command, I mean, before this happened I used to write the 4 * and I was logged out immediately of the overlay, now, I have to press Enter after the 4 * to log out the OVL.

Here is what happened..:

REQ: prt
TYPE: tnb
TN 27 4
.
.
.
.

NACT
TIM000 17:52 31/7/2003 CPU 0

AUD021 0019B60A 00000100 00000001 00000450 00000000 00000000 00000006 00000450

AUD028 0019B60A 00000100 00000001 00000000 00000000 00000000 00000006 00000450

AUD004 0019B60A 00000000 00000000 00000000 00000000 00000000 0000000C 00003180

AUD017 00000004 0000FFDE 0000FFFE

AUD019 00008114 00001150 00004050

AUD017 00000031 00007FCA 00007FFA

AUD019 00008C50 00001F50 00004180

AUD019 00008C54 00000450 00000181

AUD017 0000003F 0000FFDE 0000FFFE
****

OVL000
>
TFS501 4 1 0

TFS501 49 2 0

TFS501 63 1 0


I hope someone can help me to fix this problem, and what happened.

 

[Supernn]

the system automatically loggs you out after a certain amount of time.
Try to find the following string in the part you've deleted from your post:
TTY #xx LOGGED OUT SUPERNN hh:mm d/m/yyyy
SESSION DURATION: 00:00

This means you're logged out.
Try to log in again.

 

[one234]

Hi,

You probably have line editing turned on. You can turn it of by typing LOF at the ">" prompt.

For the extra lines you should check you ports settings...

Marc D.

No trees were killed in the sending of this message. However a large number of electrons were terribly inconvenienced.