Have to dial 011 twice??

[29mac29]

I'm setting up a new PRI with a new carrier and I think I've got everything setup correctly except that I have to dial 011 twice for the call to be recognized as an international to the carrier. Please see the call monitor below. Any help would be great.

DCH 1 UIPE_OMSG CC_SETUP_REQ REF 00000063 CH 18 23 TOD 15:17:46 CK 0065474E
PROGRESS: ORIGINATING END IS NOT ISDN
CALLING #:3157872200 NUM PLAN: E164 TON: NATL
CALLED #:582122422144 NUM PLAN: E164 TON: INTL

DCH 1 UIPE_IMSG CC_PROCEED_IND REF 00000063 CH 18 23 TOD 15:17:46 CK 0065482F

DCH 1 UIPE_IMSG CC_PROGRESS_IND REF 00000063 CH 18 23 TOD 15:17:46 CK 0065489A
PROGRESS: INBAND INFO OR PATTERN IS AVAIL

DCH 1 UIPE_OMSG CC_DISC_REQ REF 00000063 CH 18 23 TOD 15:17:50 CK 00656074
CAUSE: #16 - NORMAL CALL CLEARING

DCH 1 UIPE_IMSG CC_RELEASE_IND REF 00000063 CH 18 23 TOD 15:17:50 CK 006560C6

DCH 1 UIPE_OMSG CC_RELEASE_RESP REF 00000063 CH 18 23 TOD 15:17:50 CK 006560CC

DCH 1 UIPE_OMSG CC_SETUP_REQ REF 00000064 CH 18 23 TOD 15:18:14 CK 0066174E
PROGRESS: ORIGINATING END IS NOT ISDN
CALLING #:3157872200 NUM PLAN: E164 TON: NATL
CALLED #:31206847676 NUM PLAN: E164 TON: INTL

DCH 1 UIPE_IMSG CC_PROCEED_IND REF 00000064 CH 18 23 TOD 15:18:14 CK 00661829

DCH 1 UIPE_IMSG CC_PROGRESS_IND REF 00000064 CH 18 23 TOD 15:18:14 CK 0066188D
PROGRESS: INBAND INFO OR PATTERN IS AVAIL

DCH 1 UIPE_OMSG CC_DISC_REQ REF 00000064 CH 18 23 TOD 15:18:18 CK 00663615
CAUSE: #16 - NORMAL CALL CLEARING

DCH 1 UIPE_IMSG CC_RELEASE_IND REF 00000064 CH 18 23 TOD 15:18:18 CK 0066365E

DCH 1 UIPE_OMSG CC_RELEASE_RESP REF 00000064 CH 18 23 TOD 15:18:18 CK 00663666

 

[trvlr1]

Are you saying that your dial string is 9011011582122422144 to make this work? If not what?

Can you show how this is set up in LD 90 and also the RLB of the RLI in LD 86?

 

[29mac29]

Yes, but I'm just connecting to the trunk route with ACOD. This new route is a PRI NI2. With the new carrier if I dial 011 and the number the system doesn't send the 011 to the carrier. The carrier is telling me that they need to see those digits. My current carrier is AT&T on a standard T1 and I don't have any issues. I'll send the data you requested soon.

Thank you

 

[bhassell2000]

I would look at the DMI ad see if it is being stripped off

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[janaya]

in the dmi, you may want to put INTL in the CTYP and it will pulse out international. that may help, or like buddy said, just see if the dmi is stripping off 011. Your old carrier may not have needed it.

 

[29mac29]

Dumb question, If I bypass Bars with the Routes ACOD the DMI will be bypassed as well, correct?

 

[janaya]

yes, because the DMI tables are part of the RLB which is part of the NARS/BARS world. Dialing the ACOD just puts you on the next available port.