Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Have to change entire Farm to new subnet

Status
Not open for further replies.

Breezeman

IS-IT--Management
Dec 12, 2001
125
US
Current configuration:
7 servers in farm
Server OS= window server 2003 standard
Citrix version= 4.5
Web interface 4.5
We have been absorbed by a new group and must change our IP addresses from xxx.xxx.xxx.xxx to yyy.yyy.yyy.yyy.
I started by going to the domain controller and changing a single server's (in the farm) IP address to the new subnet in DNS. I made the change on the server as well, However, it still shows up as the old IP address in mangement console, and it errors out saying it cannot connect to the database store. Any help would be appreciated. Breeze



HEY, WATCH THIS!
 
Breezeman,
I have exactly the same configuration you depicted above, we also went through the same process when my company was acquired two years ago. When we were forced to change subnet from 192.x.x.x to 10.x.x.x, it was not a problem. I have to say my citrix servers were\are hard coded before\after. Question: Which management console you are talking about? Access Management console or Presentation Server Console?

Alex
 
Turns out I had the correct formula just didn't give the servers enough time to settle down after the changes. Thank Breeze

HEY, WATCH THIS!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top