Have a different phone ring after hours, NS700

[Justin RSU34]

I've got three staff phones ringing together during the school day currently on our NS700, but the principal of that school wants her phone to ring instead of the other three for a few hours after school. I thought this was set up through the Week Calendar, but it's apparently not working. What else do I have to do? Thanks.

 

[EMJP]

It's quite weird, but the "Breaks" times must be during the days or nights, so you have to make a shift of one minute for example.

 

[Justin RSU34]

It's quite weird, but the "Breaks" times must be during the days or nights, so you have to make a shift of one minute for example.
View attachment 1063
View attachment 1064

Hi, I set daytime from 7 to 2:30 and then night time to start after that. What would I need to set up a break time for? And also, where do I assign who gets the calls at night time? Thanks.

 

[EMJP]

I didn't understand, it's because you missed your night route. Check everything carefully.

 

[Justin RSU34]

I didn't understand, it's because you missed your night route. Check everything carefully.

Thank you. Where do I set who's phone I want to have ring at night? Under extensions > wired extensions > extension settings > Intercept Destination?

 

[CMUK]

You do it on the DDI/DID table.

 

[Justin RSU34]

Thank you. Where do I set who's phone I want to have ring at night? Under extensions > wired extensions > extension settings > Intercept Destination?

Uh oh. Please forgive my ignorance, but is a DDI the full phone number? In this case, the main number for the school? Once I set that, do I then just set the principal's DDI as the night destination? Thanks for your help.

 

[CMUK]

Yes correct.

 

[Atharv95]

Hi Guys,
I currently have three staff phones ringing together during the school day on our NS700, but the principal wants her phone to ring instead of the others for a few hours after school. I thought this was configured through the Week Calendar, but it’s not working. What else do I need to set up? Thanks.