Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Handset Volume Control on SIP Phones (see thread1812-1713810)
- Thread starter ORPG
- Start date
theislandtech
Technical User
I don't have any sip phones on UCX systems.
On asterisk based systems that I have, all the sip phones retain the volume set by the user of the phone
On asterisk based systems that I have, all the sip phones retain the volume set by the user of the phone
SIP phones are to a great extent independent devices - they maintain all their properties (such as volume levels) without allowing any control to the server(s) to which they are connected. Due to that, you cannot configure SIP phone volume levels from the UCx management GUI. Typically, SIP phones have their own GUI pages that allow the user to configure various parameters of the phone. This interface differs from manufacturer to manufacturer and from model to model. You'll have to look in the phone's GUI or find a manual for your specific SIP phone to determine if/how to configure the phone to retain volume levels for multiple calls.
- Status
Similar threads
