Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
h3323 config
- Thread starter bioser
- Start date
There are quite a few different google results. Do a google "asterisk h323 trunk to XXX".
I worked a couple of years ago on connecting to Avaya Comm Manager with limited success. I ultimately connected with PRI and had great success. While this did cost more for the equipment on either side, it was quick and painless.
Bottom line, if you have the time, I would give the H323 a shot, but know that a PRI solution is available.
Clowns to the left of me, jokers to the right, here I am, stuck in the middle with you.
I worked a couple of years ago on connecting to Avaya Comm Manager with limited success. I ultimately connected with PRI and had great success. While this did cost more for the equipment on either side, it was quick and painless.
Bottom line, if you have the time, I would give the H323 a shot, but know that a PRI solution is available.
Clowns to the left of me, jokers to the right, here I am, stuck in the middle with you.
- Thread starter
- #3
H323 isn't too difficult, just a bit rudimentary. Make sure you have ooh323 loaded.
-----------------------------------
Calgary Telephone Systems, Avaya LG Asterisk (FreePBX) VOIP & TDM
-----------------------------------
Calgary Telephone Systems, Avaya LG Asterisk (FreePBX) VOIP & TDM
- Status