Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

H323 trunk group issue

Status
Not open for further replies.

archer1300

IS-IT--Management
Sep 4, 2003
51
US
I have set-up a H323 trunk group between s8700 runnig 4.1 and Cisco CM running 6.1

From the s8700 I can pass name number and voice both ways. I cannot establish call from the Cisco side. The call timesout, I never see a call set-up request on the Avaya side.

Any ideas?
 
Did you ever figure this out? I am seeing the exact same problem...
 
same here.. with s8500 cm401. anyone solved the problem?
 
Try setting up another signal group and adding a couple of IP trunks using this sig group into your existing Trunk Group.

But on the new sig group do not place ANYTHING in the Far End Node name field. Leave it open. Place your CLAN Node in the Near End like normal. You should be able to complete a call.

This worked for me.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top