H323 IOS gateway not registering on Callmanager

[networkgreasemonkey]

I was wanting to know if there is a way to get my 2600 w/ FXO ports to register with my call manager (4.2). Currently I can send and recieve calls on my phones but the status of my gateway in call manager is "UNKNOWN" below is my lab config for my gateway:

Building configuration...

Current configuration : 1994 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname WBRVVG01
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$YKZe$dKd2Pqsliwg1kOnCqq7q1/
enable password 7 047C5A0A0D331F1A4211
!
no aaa new-model
ip subnet-zero
ip cef
!
!
ip domain name webtimecomputers.com
ip name-server 172.20.20.32
!
!
!
voice call convert-discpi-to-prog always
!
voice class codec 99
codec preference 1 g711ulaw
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
ip address 172.20.20.22 255.255.255.0
duplex auto
speed auto
h323 interface 1720
h323 t120 bypass
h323-gateway voip bind srcaddr 172.20.20.22
!
router eigrp 100
redistribute connected
redistribute static
network 172.20.0.0
network 0.0.0.0
no auto-summary
!
no ip http server
ip classless
!
!
no cdp run
!
!
voice-port 1/0/0
pre-dial-delay 0
battery-reversal answer
timeouts call-disconnect 1
timeouts wait-release 2
connection plar opx 1110266
shutdown
caller-id enable
!
voice-port 1/0/1
shutdown
!
!
dial-peer cor custom
!
!
!
dial-peer voice 100 pots
preference 2
destination-pattern 9[2-9]......
port 1/0/0
forward-digits 7
!
dial-peer voice 101 pots
preference 2
destination-pattern 9911
port 1/0/0
forward-digits 3
!
dial-peer voice 200 pots
preference 3
destination-pattern 91[2-9]..[2-9]......
port 1/0/0
forward-digits 11
!
dial-peer voice 102 pots
preference 2
destination-pattern 9411
port 1/0/0
forward-digits 3
!
dial-peer voice 103 pots
preference 2
destination-pattern 911
port 1/0/0
forward-digits 3
!
dial-peer voice 500 voip
destination-pattern .......
progress_ind setup enable 3
progress_ind progress enable 8
progress_ind connect enable 8
progress_ind disconnect enable 8
voice-class codec 99
session target ipv4:172.20.20.14
dtmf-relay h245-alphanumeric
!
gateway
timer receive-rtcp 5
!
!
gatekeeper
shutdown
!
!
line con 0
line aux 0
line vty 0 4
password 7 1132111746471F5D0A79
login
!
!
end

Any help would be appreciated.
Also if anyone can provide a description of how to allow me to route calls to a huntgroup on call manager so I can forward to individuals phones from there it would be great. Thanks

 

[paduhome]

Hi,

This is normal, H323 gateway never register with a callmanager, this is because H323 is a peer to peer protocol and not a master / slave protocol like MGCP or SCCP.

for the hunt group on CM, first create a Line Group and place the directory numbers you want in the group (only know directory number are possible so no FXS ports on H323, only FXS ports on MGCP gateways can be added). Then create a Hunt List and assign the Line group to the hunt list, last thing you need to do is to create a hunt pilot number where you assign the hunt list to. Now when you call the hunt pilot number it will ring on the DN that you selected in the Line Group configuration (you can select diferent distribution algorithms).