Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

H323 faxserver problem

Status
Not open for further replies.

knoester

Technical User
Nov 20, 2005
72
NL
Hello all,
We use a h323 ip trunk to connect to a faxserver.
all happend after an upgrade from 3.1.5 to 5.2.1
First there was a bearer capability problem.
Changing the bearer capabilty in the signaling group of the H323 to speech and in the DS1 board solved incoming faxes,but not the outgoing faxes.
Now we get a denial event 1164 (no isdn cause)
We have made a test with a local fax and have the same problem so it looks like an internal problem.

There is a S8800 server with a G650 gateway.
We use a TN 2302 medpro.

In the G711 codecset we use T38 for fax

Someone had this issue before?

Thanks a lot,
 
Try turning off send name on the trunk group. You'll find it on the second page. I read in another thread that might help...
 
Turning it off won,t help
Thanks anyway,

Anyone else suggestions?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top