Hello all,
We use a h323 ip trunk to connect to a faxserver.
all happend after an upgrade from 3.1.5 to 5.2.1
First there was a bearer capability problem.
Changing the bearer capabilty in the signaling group of the H323 to speech and in the DS1 board solved incoming faxes,but not the outgoing faxes.
Now we get a denial event 1164 (no isdn cause)
We have made a test with a local fax and have the same problem so it looks like an internal problem.
There is a S8800 server with a G650 gateway.
We use a TN 2302 medpro.
In the G711 codecset we use T38 for fax
Someone had this issue before?
Thanks a lot,
We use a h323 ip trunk to connect to a faxserver.
all happend after an upgrade from 3.1.5 to 5.2.1
First there was a bearer capability problem.
Changing the bearer capabilty in the signaling group of the H323 to speech and in the DS1 board solved incoming faxes,but not the outgoing faxes.
Now we get a denial event 1164 (no isdn cause)
We have made a test with a local fax and have the same problem so it looks like an internal problem.
There is a S8800 server with a G650 gateway.
We use a TN 2302 medpro.
In the G711 codecset we use T38 for fax
Someone had this issue before?
Thanks a lot,
