H175 VIDEO COLLABORATION STATION already configured in Sys. Manager under Management user and the SIP Phone H175 also done configuration and I'm getting the dial tone via SIP but when I check the status in CM ASA the attached file still in OOS. kindly advise us regarding this issue..Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
H175 VIDEO COLLABORATION STATION
- Thread starter floreswb
- Start date
That's totally normal for a SIP station - it's not directly connected to CM, so it always shows out of service. It's the Off pbx server state in service/idle that you care about.
Trace the station in CM, run a traceSM. If it isn't behaving properly, you'd want to check your SIP domains and application sequences in SM and your sip sig groups in cm.
Trace the station in CM, run a traceSM. If it isn't behaving properly, you'd want to check your SIP domains and application sequences in SM and your sip sig groups in cm.
- Thread starter
- #3
I don't think there's much needed to activate it. It needs to be "ip video enabled" in the station form in CM, but as far as activating the camera, I'd figure you'd be able to get a self-view of the camera on screen pretty easily - even though I haven't fooled around with one myself.
- Status
Similar threads
- Locked
- Question
