GUI for Cisco Call manager express and Unity Epress 1

[serge9]

Good day Gens

I am X Nortel SL1 admin,
i wanted to learn Cisco Voip, admin, etc

I got a home lab set with Cisco VoIP system (cisco IP Phones, switches (3750 PS), Routers 2811)
I got a friend of mine (lost his contact info) to install Call manager express and unity express on cisco 2811,
He also installed Cisco soft phone, and Gui access to unity and Call manager express admin on a laptop
And got the system working ready for me to practice VoIP admin
Unfortunately, I got cancer and has been following a treatment for a year
Lately, I tried to use the laptop (Toshiba Tecra 9100) model (PT310C-00DZGP, serial 72121542P)
And I get a black screen with
Built – in HDD Password =
which mean the Hard disk is dead, since i never set a HDD password

i need to install Cisco softphone, Gui access to manage Unity and call manger express on another laptop
this time i will make HD image in case

Thanks
Serge
Tech User

 

[jpm121]

CME and CUE don't use a GUI program, they are web accessible from any browser, or even a console cable to the router.

 

[serge9]

Thank you very Much JPM121
i opened intrent explorer
wrote the IP address Http:\\172.20.14.1
got the login screen

entered the user name and the password
i was in
BUT
it was in text
it showed
Cisco
accessing Cisco 2811 homelab
show diagnostic log
mointor the router : HTML access to command line
show knowledge support
if i click on Monitor the router
i get
Router name
Home exec Configure

but i can not get to graphical user interface as i had it set
there must be something missing

Thanks
Serge

 

[serge9]

I found out that there are GUI files for CME (version specific)must be dowloaded and extracted to the flash
then,
i opened a browser
typed
cme IP address/telephony-service.html
example
172.20.14.1/telephony-service.html

and here it goes
i got access to the gui access to adminstrate CME
typed in the usere ID and PAssword
and that is it

Thanks

Serge