group call pickup TSW

[sersam]

Hi all!
I have a problem with a pickup group Mx-One TSW, and I'm not getting delete or include new members and also members reading the programmed this group.
Is there another way to delete this group because the other groups are working.

Thanks

 

[Satellite1900]

what commands you run?
You can print out the various stages and the group?

\Satellite1900

 

[parnum]

restart GPP in all lims anytime, no effect on service,

best parnum

 

[sersam]

Hi,

Restart the unit was given the GPP program several times, also RFEXI.
Below an example of what is happening:

<GHDAP:GRP=10;
NOT ACCEPTED
GRP
NOT IN RANGE
<GPDAP:GRP=10;
WAIT
WAIT
WAIT
WAIT
WAIT
WAIT
WAIT
WAIT
WAIT
WAIT
WAIT
WAIT
WAIT
WAIT
WAIT
WAIT
COMMAND LOST

<HIMDP;

DIAGNOSTICS FROM OPERATING SYSTEM
TIME DATE
14:09:40 03JAN13
NO INFORMATION STORED IN LIM 001, LAST HIREI: 14:02:34 03JAN13
NO INFORMATION STORED IN LIM 002, LAST HIREI: 14:02:34 03JAN13
DIAGNOSTICS FROM LIM 003, LAST HIREI: 14:02:35 03JAN13

TIME DATE ERROR CODE
14:03:23 03JAN13 H'13
FAULTY POINTER
LOGICAL PROGRAM ERROR ADDRESS = 0204DB3E
ENTER
SWSW B-LEVEL SIGNAL FETTCSINFE (H'004B)
FROM GHH (H'163) EXE A IN LIM 001
TO DER (H'17D) EXE A IN LIM 003
NUMBER OF DATA BYTES IN SIGNAL = 9
WITH 0 1 2 3 4 5 6 7 8 9
000 FF FF 00 01 0B 01 63 01 00

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 04 4F E8
NO INFORMATION STORED IN LIM 004, LAST HIREI: 14:02:34 03JAN13
NO INFORMATION STORED IN LIM 005, LAST HIREI: 14:02:34 03JAN13
NO INFORMATION STORED IN LIM 006, LAST HIREI: 14:02:35 03JAN13

 

[fcpli]

Just to be sure: Are you speaking about gruop pickup or group hunting? The command you enter here is for group hunting....
But whatsoever, you have a problem with either DGP or DER, the member pointer is missing in FETTCSINFE. To ensure where the fault is, trace GHH when keying GHDAP. Start of PU's won't help in this case...

 

[sersam]

Hi,

Actually my problem is the group pickup 10 only. The other groups are working.

Thanks.

 

[fcpli]

Sorry, I was not reading your post properly. In any case, the problem seems to be in LIM3 DER or GPP, so the trace would help, just key GPDAP (not GHDAP). If you know the first dirno in the group, check if it works (make a normal call). If yes, the problem most probably is in GPP....