Got a little issue here with a ground start trunk for a customer's 911 outbound calls. When you hit the ACOD for the 911 route - you hear a chunking sound for a few seconds, then it gives up and goes to ENTR 1 for their 911 RLI.
No problems with the circuit at the demarc - can ground start it just fine on my buttset - so no problems there. So tried tossing it to telco - they didn't find anything. Tried a different port in the trunk card - no luck. Tried another port in another trunk card - no luck. Bypassed the DEES powerfail switch - no luck. So kinda scratching my head on this one.
Once in a while I'll get a TRK154 error when hitting the ACOD for this trunk - but disabling/enabling the port fixes that (polarity on the trunk is fine).
Other ground start trunks in the system seem to be working just fine.
Any ideas on where to go with this?
Here's the 911 route member in question (it's only one route member)...
DES 911
TN 010 0 00 03
TYPE COT
CDEN 8D
CUST 0
XTRK XUT
TIMP 600
BIMP 3COM
TRK ANLG
NCOS 0
RTMB 9 1
ATDN 7600
SIGL GRD
SUPN NO
AST NO
IAPG 0
CLS UNR DTN WTA LPR APN THFD
P10 NTC
TKID 1234567
AACR NO
DATE 30 JUL 2007
Here's the first route member for the ENTR 1 RLI - programmed the same... but this one works.
DES 2345678
TN 010 0 00 02
TYPE COT
CDEN 8D
CUST 0
XTRK XUT
TIMP 600
BIMP 3COM
TRK ANLG
NCOS 0
RTMB 0 7
ATDN 7600
SIGL GRD
SUPN NO
AST NO
IAPG 0
CLS UNR DTN WTA LPR APN THFD
P10 NTC
TKID 2345678
AACR NO
DATE 30 JUL 2007
Route's RDB....
TYPE RDB
CUST 00
DMOD
ROUT 9
DES 911
TKTP COT
NPID_TBL_NUM 0
PRIV NO
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK NO
ISDN NO
PTYP ACO
AUTO YES
ICOG IAO
RANX NO
SRCH LIN
TRMB YES
STEP 0
ACOD 2909
CPP NO
TARG 01
CLEN 1
BILN NO
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
OOD 1
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
CRD 512
IENB 5
TFD 0
LEXT 100
VGD 6
SST 3 0
NEDC ETH
FEDC ORG
CPDC NO
SPCT IMM
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
RVSD 08 31
ILLR 02 02
DRNG NO
CDR NO
MUS NO
MR NO
MANO NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
TTBL 0
ATAN NO
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO
Thanks!
No problems with the circuit at the demarc - can ground start it just fine on my buttset - so no problems there. So tried tossing it to telco - they didn't find anything. Tried a different port in the trunk card - no luck. Tried another port in another trunk card - no luck. Bypassed the DEES powerfail switch - no luck. So kinda scratching my head on this one.
Once in a while I'll get a TRK154 error when hitting the ACOD for this trunk - but disabling/enabling the port fixes that (polarity on the trunk is fine).
Other ground start trunks in the system seem to be working just fine.
Any ideas on where to go with this?
Here's the 911 route member in question (it's only one route member)...
DES 911
TN 010 0 00 03
TYPE COT
CDEN 8D
CUST 0
XTRK XUT
TIMP 600
BIMP 3COM
TRK ANLG
NCOS 0
RTMB 9 1
ATDN 7600
SIGL GRD
SUPN NO
AST NO
IAPG 0
CLS UNR DTN WTA LPR APN THFD
P10 NTC
TKID 1234567
AACR NO
DATE 30 JUL 2007
Here's the first route member for the ENTR 1 RLI - programmed the same... but this one works.
DES 2345678
TN 010 0 00 02
TYPE COT
CDEN 8D
CUST 0
XTRK XUT
TIMP 600
BIMP 3COM
TRK ANLG
NCOS 0
RTMB 0 7
ATDN 7600
SIGL GRD
SUPN NO
AST NO
IAPG 0
CLS UNR DTN WTA LPR APN THFD
P10 NTC
TKID 2345678
AACR NO
DATE 30 JUL 2007
Route's RDB....
TYPE RDB
CUST 00
DMOD
ROUT 9
DES 911
TKTP COT
NPID_TBL_NUM 0
PRIV NO
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK NO
ISDN NO
PTYP ACO
AUTO YES
ICOG IAO
RANX NO
SRCH LIN
TRMB YES
STEP 0
ACOD 2909
CPP NO
TARG 01
CLEN 1
BILN NO
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
OOD 1
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
CRD 512
IENB 5
TFD 0
LEXT 100
VGD 6
SST 3 0
NEDC ETH
FEDC ORG
CPDC NO
SPCT IMM
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
RVSD 08 31
ILLR 02 02
DRNG NO
CDR NO
MUS NO
MR NO
MANO NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
TTBL 0
ATAN NO
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO
Thanks!