I have 3 32 port FXS gateways all configured and for the most part are working ok. They are connected to an asterisk based PBX and I can call from ext to ext, connect, talk etc but when I try to dial out, as soon as I finish dialing the external number, after about 2 seconds, I hear a click and it disconnects and I go back to dial tone.
The trunks are the pbx are fine because I can dial out ok from any of the IP phones registered to the PBX. I use 9 to dial out and do have it in my dial plan on the gateway. Here is a copy of the dial plan....
{ ^1900x. | [1-4]xx | [91][2-9]xx[2-9]xxxxxx | [9][2-9]xx[2-9]xxxxxx | 9011[2-9]x. | [3469]11 | *x+ } I have tried removing the brackets around the 9 and 91 but I get the same results.
Is there something wrong in it or is it something else I might be missing?
The trunks are the pbx are fine because I can dial out ok from any of the IP phones registered to the PBX. I use 9 to dial out and do have it in my dial plan on the gateway. Here is a copy of the dial plan....
{ ^1900x. | [1-4]xx | [91][2-9]xx[2-9]xxxxxx | [9][2-9]xx[2-9]xxxxxx | 9011[2-9]x. | [3469]11 | *x+ } I have tried removing the brackets around the 9 and 91 but I get the same results.
Is there something wrong in it or is it something else I might be missing?
