Global Directory?

[98Converter]

This has probably been asked a thousand times. I just can't find any good information on it.

We have 2 8700 CM2.0 PBX's. 1 in the states, 1 in Canada. We have IP Trunking turned on between sites. They both reside on our WAN. We would like to know if there is a way to have 1 Directory between sites? And what the easiest way to do this is...

Thanks for all information.

Regards,
Chris

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.

 

[ph0neguy]

If you turn on DCS+ there is a feature called IDS that you put on the second page of the signaling group. I've never done it over Ip trunks before but I assume it would work just as if it were ISDN. Its not that hard to set up at all.

 

[orypecos]

It seems to be that there was a post saying that to have multiple pbx directory u had to pay for it. Do 'display system cust' and see if there is a setting for it and if u have it turned on.
I searched old posts but was unable to find the post.

Da-vi'do

P.S. A message to all,if you want to get the best response to a question, please read FAQ222-2244 first. Also give the type & version of your voice mail & pbx system & preview your post to make sure it is complete & understandable. Be aware that if u don't answer a question, I usually will not continue to help u.

 

[98Converter]

Great - Thanks guys.

I'll take a look at both options.

Thanks again,
Chris

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.