Getting system info from BCM400 Element Manager

[sienz]

Hi All,

We have BCM 400 4.0 in our remote site. My manager needs to get some information about this system. Can we get these info from the BCM Element Manager:

Number of station ports
# of Analog Stations
# of Digital Stations
# of IP Stations

Number of Trunk Ports
# of Analog Trunks
# of PRI/T1 Trunks

If yes, where can i get these info. I have accessed to the BCM element manager but not sure inside.

Thanks

 

[senk1s]

Between the keycodes activated and modules installed 'yes'

Trunks - along with your phone bills

 

[SupportDude]

On the configuration tab, expand the Resources folder.
Highlight Telephony Resources. You should be able to gather all of your information there.



-SD-

http://www.mysupportguy.net

 

[gberger]

Or go in -Administration-General-Hardware inventory-System-Media Bay Module for all the modules installed or -Devices- for all the analog,digital or Ip sets.