Getting DTI 0012 error

[mikethephoneguy]

option11c running 4.5 attempting to enll tmdi card in LD 60 and i get this error

Network/loop x pack does not respond from IOTEST; loop/card x is disabled

has anyone seen this before and can expand on what the error code is getting at?

 

[bhassell2000]

I thought you enabled the TMDI in LD 96 then the loop in LD 60

enl tmdi x fdl

x = tmdi number

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[mikethephoneguy]

yes you are correct

attempted to enable the loop in LD 60 and got the DTI error there.

 

[bhassell2000]

did you run SLFT TMDI X to run a self test to see if the card is ok?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[mikethephoneguy]

yes i did that and it says its ok

 

[bhassell2000]

ok, what happens when you STAT TMDI in ld 96?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[mikethephoneguy]

when i STAT TMDI in LD 96

TMDI X ENBL

DITI X OPER PORT 0

DCH 20 DIS PORT 1

when i enable the DCH in 96 and then try to enable the loop in 60 i still get the DTI0012 error.

 

[mv114]

Try doing a "RST TMDI X" or disabling the tmdi, and re-seating it and then re-enable with the fdl ...maybe its just confused. It has worked for me in the past.

 

[mikethephoneguy]

yes you are correct

attempted to enable the loop in LD 60 and got the DTI error there.