Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Getting DTI 0012 error

Status
Not open for further replies.

mikethephoneguy

Technical User
Sep 15, 2006
95
CA
option11c running 4.5 attempting to enll tmdi card in LD 60 and i get this error

Network/loop x pack does not respond from IOTEST; loop/card x is disabled

has anyone seen this before and can expand on what the error code is getting at?
 
yes you are correct

attempted to enable the loop in LD 60 and got the DTI error there.
 
when i STAT TMDI in LD 96

TMDI X ENBL

DITI X OPER PORT 0

DCH 20 DIS PORT 1

when i enable the DCH in 96 and then try to enable the loop in 60 i still get the DTI0012 error.
 
Try doing a "RST TMDI X" or disabling the tmdi, and re-seating it and then re-enable with the fdl ...maybe its just confused. It has worked for me in the past.
 
yes you are correct

attempted to enable the loop in LD 60 and got the DTI error there.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top