Getting CO line from other intersite pbx

[jvparagna]

Hi All,

I have 3 sites namely Perth, Brisbane and Manila, these pbx are link together and can call thru local numbers. How can I get CO from 2 site that can call as normal number. Example if I want call Australian number just get CO from any sites like in Perth or Brisbane. Please advise.

 

[obtsystems]

You could use ars to route calls on each site

 

[jvparagna]

so how can I get any CO on the other site instead of making international calls from our PBX?

 

[jvparagna]

How can I use ars, to get a CO in other site? ARS use only for local PBX not the other site PBX, right?

 

[Otoni79]

I think you just need to set ARS in each site.Once that is done,all you need to access that remote PBX which you have stated you dnce the remote PBX is accessed you can then cease a line from it and ARS takes course.

 

[cwc3]

dial 807 from Manila that would access a trunk in oz by default

 

[jvparagna]

after I dial 807 from manila, I can call oz numbers? how?