gdk16 ddi programing

[jabiru]

I can not get the ddi settings to work on the gdk16. 4ch bri im in main 4 sub 10 done the day btn 2 and night btn 4 dest ie ext 103 and the last 6 digits sent by bt btn 6. tei fff. Help would be greatly appreciated.regards stewart jackson

 

[doktor]

Go to Menu 4-10.
In this menu there are 6 parameters can be set for any of the 24 MSN / DDI numbers if you are using ISDN (or analog PSTN lines )that the PBX can handle.
The 6 parameters are "1" = CO line number (1-6), "2"=DAY extension number, 3 = N/A, 4 = NIGHT extension number,, 5 = N/A, 6 = The real DDI number to the local machine (all digits received fro nth public exchange - try with all, not nonly the last 6 digits) , only ISDN.
Parameters 3 and 5 are not used.
You are going to use parameter 1, 2 and 4.
With your fixed TEI of FFFF, it should work if the DDI number serie come in on all the 4 ISDN2 lines (BRI).

///doktor

 

[MightyRed]

Have you done flex key 3 for lines, then put in your co range, then flex key 2 for isdn attributes, then flex 4, then flex key 1 to toggle to ddi use yes and then press hold/save

 

[doktor]

Also check that :
Main Menu 03 (with CO line 1-8)-> SUB-MENU (Flex button) 02 "ISDN Line Attribute" -> Terminal Menu 04 "DID Line Use".
DID Line use should be set to YES!

///doktor

 

[jabiru]

Still struggling with this mm3 sub2 tm04 tog yes sets to direct inward dial not ddi,call comes in and drops out imeadiately with this at yes regards sj

 

[SteveBUK]

Sound like DDI(DID)/MSN needs to be programmed in Main Menu 4, Sub Menu 10..

The digits of the telepgine number must match exactly what is beig sent... ie 3 digits or 6 digits, as per line provider..

 

[jabiru]

Thanks steve as per earlier threads been in to 4/10 6 digits sent,6
programed is there any other area to prog,regards s.jackson

 

[SteveBUK]

To program the DDI/MSN (DID)
Would Set lines for DID Use Main Menu 3, Sub Menu 2, Key 4
Then set up routing for the DIDs in Main Menu 4, Sub Menu 10.

Also worth checking a few options on the station side.
Main Menu 2, Station range, Sub Menu 1, Key 13, DID Ring = Yes
Main Menu 2, Station Range, Sub Menu 2, Key 3, MSN = No
Check that stations have CO Line buttons or a LOOP key programmed

Regards
Steve