Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

GATM

Status
Not open for further replies.

Onyx1

Programmer
Apr 28, 2005
85
CA
Has anyone had issues w/ certain ports or the entire module not working after a system shutdown (pwr outage, etc) w/o going thru the proper shutdown sequence in programming.

I've had a couple of sites where I had to replace GATM due to the system not recognizing the module. Under resources it says unequipped even tho the LEDs show green.

I now have a site that when line 1 rings it's just a long steady tone.

Your feedback is greatly appreciated.
 
Nortel has cut corners recently on their quality control and the equipment itself. There's a lot of bad out of box equipment out there. Also, a lot of trunk cards failing due to ring voltage that is well within the tolerances.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top