GATM

[Onyx1]

Has anyone had issues w/ certain ports or the entire module not working after a system shutdown (pwr outage, etc) w/o going thru the proper shutdown sequence in programming.

I've had a couple of sites where I had to replace GATM due to the system not recognizing the module. Under resources it says unequipped even tho the LEDs show green.

I now have a site that when line 1 rings it's just a long steady tone.

Your feedback is greatly appreciated.

 

[REJ1968]

Nortel has cut corners recently on their quality control and the equipment itself. There's a lot of bad out of box equipment out there. Also, a lot of trunk cards failing due to ring voltage that is well within the tolerances.