Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

GASM8 Power LED Flashing Red/Yellow

Status
Not open for further replies.

Levitra

Instructor
Aug 2, 2007
29
US
I have a GASM8 in my BCM50 which has the power LED flashing, alternating from red to amber. The status ight is solid green. Any reference documents on these codes?

Thank you for your time.
 
Definitely not normal. The best plan is to reseat the module. Do a cold reboot and while down, pull out card, check pins, and reseat.

Adversity is Opportunity
 
Yes, it seems a 12V regulator chip is blown on the board.

Now to source the part. LOL

Thank you kindlyfor you response.

But my question is: Is(are) there a reference document(s) that lists the LED flash codes for BCM Modules?
 
Biv or cook would have that answer. I say no.

Adversity is Opportunity
 
The I&M guide gives you the status light meanings.You can find it using IE to the IP address and select Admin Docs.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top